Lab Architecture — Operation DragonRx

Cover image

Article Metadata

Category: CTI
Source article: https://medium.com/@1200km/lab-architecture-operation-dragonrx-38602f432e5c
Published: 2026-05-02
Preserved media: 10 image(s), including cover images, screenshots, diagrams, and infographics where present.
Preserved technical blocks: 28 code/configuration block(s).

Ecosystem Fit

This page mirrors the original Medium article into the 1200km.com Docusaurus ecosystem. The original article flow, images, screenshots, infographics, and technical blocks are preserved from the export.

Part of the Operation DragonRx series · Overview · Lab Architecture · Attack Playbook · DFIR Walkthrough

**A fully automated, reproducible APT41 detection lab.**Docker + Vagrant + Ansible provisioned in a single command. Three Windows VMs (Active Directory, file server, workstation), eight Linux containers (attacker tooling, Log4Shell target, Wazuh/Elastic/Zeek SIEM), and custom attack simulation tooling. Built for security researchers studying Log4Shell exploitation, Kerberoasting, DCSync, and lateral movement — with full SIEM telemetry from day one.

Estimated deploy time:~25 min (boxes cached) ·**Host requirements:**24 GB RAM, 8 cores, 120 GB SSD

Operation DragonRx series:

CTI Report

[APT41 Targeting Pharmaceutical Sector: Log4Shell to Domain Compromise Threat Intelligence Report | Operation DragonRx

Lab Architecture

[Lab Architecture — Operation DragonRx Part of the Operation DragonRx series · Overview · Lab Architecture · Attack Playbook · DFIR Walkthrough

Attack Playbook

[Attack Playbook — Operation DragonRx Phase-by-Phase Attack Guide: Exact Commands Against the Deployed Lab

Detection Guide (in progress…)

DFIR Playbook (in progress…)

Malware Analysis (in progress…)

Table of Content

Deployment Stack: Docker + Vagrant + Ansible
Deploy from Git
Destroy the Lab
Network Topology
Directory Structure
Prerequisites
Vagrantfile
docker-compose.yml
Ansible
Ansible Roles
Master Deploy Playbook
Test Playbook
Zeek Config
Host Networking Setup
Makefile
Deploy Sequence
VM Specifications
Full Lab Environment Summary

Deployment Stack: Docker + Vagrant + Ansible

All infrastructure is provisioned and configured automatically. A singlemake upcommand deploys the complete lab — Linux containers, Windows VMs, Active Directory, SIEM stack, and detection tooling — with zero manual steps.

Deploy from Git

The lab is published atgithub.com/anpa1200/dragonrx-lab.

GitHub - anpa1200/dragonrx-lab *Contribute to anpa1200/dragonrx-lab development by creating an account on GitHub.*github.com

# Clone
git 
clone
 https://github.com/anpa1200/dragonrx-lab
cd
 dragonrx-lab

# Option A — Docker containers only (no Windows VMs, no Vagrant)
# Covers Log4Shell → JNDI → Sliver C2 → Wazuh/Zeek detection
docker compose up -d
until
 docker 
exec
 dragonrx_wazuh pgrep wazuh-analysisd >/dev/null 2>&1; 
do
 
sleep
 5; 
done
docker 
cp
 siem/wazuh/rules/dragonrx_rules.xml dragonrx_wazuh:/var/ossec/etc/rules/
docker 
exec
 dragonrx_wazuh /var/ossec/bin/wazuh-control restart
# → Kibana: http://localhost:5601

# Option B — Full lab (Docker + Windows VMs + Ansible)
bash scripts/deploy.sh        
# one script, ~45 min
# or: make up

> Zeek note: Zeek runs with network_mode: host (no fixed IP). Logs live inside the dragonrx_zeek container: docker exec dragonrx_zeek ls /usr/local/zeek/logs/current/

One-Script Deployment

For environments withoutmake, or when a self-contained deploy is needed:

# 
Full deployment (identical to 
'make up'
 + 
'make test'
)
bash scripts/deploy.sh

# 
Skip
 Windows VMs (reuse already
-
running
 VMs)
bash scripts
/
deploy.sh 
--skip-vms

# Skip Ansible reprovisioning (reuse already-provisioned state)
bash scripts/deploy.sh --skip-vms --skip-ansible

# Deploy 
without
 
running
 the 
final
 test suite
bash scripts
/
deploy.sh 
--no-test

**deploy.sh**performs all 7 steps in sequence:

Prints a formatted access summary on completion with elapsed time.

Destroy the Lab

# Option A — Docker only
docker compose down -v          
# stops containers and removes volumes
# Option B - Full lab (Docker + VMs)
bash scripts/destroy.sh         
# tears down VMs via Vagrant, then docker compose down -v
# or: make down

> Volumes hold Wazuh indices and Zeek logs. -v removes them; omit it if you want to preserve data between runs.

Network Topology

**Networking note:**VirtualBox VMs bridge NIC2 directly onto the Dockertarget_netbridge (br-xxxxxxxx) using Vagrant'spublic_networkdriver. No VirtualBox host-only adapter (vboxnet0) is needed.scripts/setup_routing.shenables IP forwarding and adds iptables FORWARD rules between the two Docker bridges (attacker_net↔target_net), and disables TX checksum offloading on the target bridge so Windows VMs accept TCP packets from Docker containers.

Directory Structure

dragonrx-lab/
├── Makefile 
# make up / test / attack / shell / down / reset
├── Vagrantfile 
# DC01 (WS2019), FS01 (WS2019), WS01 (Win10)
├── docker-compose.yml 
# 8 Linux containers, two named subnets
│
├── scripts/
│ ├── deploy.sh 
# ★ ONE-SCRIPT full deployment (see below)
│ ├── setup_routing.sh 
# host iptables bridge: Docker ↔ VirtualBox
│ └── fix_vboxdrv.sh 
# rebuild VBoxDRV DKMS module if needed
│
├── ansible/
│ ├── ansible.cfg 
# interpreter, timeout, retry config
│ ├── requirements.yml 
# Galaxy: ansible.windows, microsoft.ad, community.*
│ ├── inventory/
│ │ ├── hosts.ini 
# DC01/FS01/WS01 WinRM addresses
│ │ └── group_vars/
│ │ ├── all.yml 
# domain, passwords, Wazuh version
│ │ └── windows.yml 
# WinRM connection vars for all Windows hosts
│ ├── playbooks/
│ │ ├── deploy.yml 
# master playbook: 6 phases in order
│ │ └── test.yml 
# smoke tests + detection validation
│ └── roles/
│ ├── dc01/tasks/main.yml 
# AD DS install → forest promote → users → SPNs → audit SACL
│ ├── fs01/tasks/main.yml 
# domain join → SMB shares → 45 crown-jewel data files
│ ├── ws01/tasks/main.yml 
# domain join → jsmith local admin → C:\Temp
│ └── wazuh_agent/tasks/main.yml 
# download MSI → install → enroll with manager
│
├── jndi/
│ ├── Dockerfile.jndi 
# eclipse-temurin:11-jdk-jammy + Maven-built marshalsec
│ ├── start.sh 
# launch HTTP payload server + marshalsec LDAP relay
│ └── payloads/ 
# Exploit.class served to Log4Shell victims
│
├── attacker/
│ ├── Dockerfile.kali                
# kalilinux/kali-rolling base + nmap, impacket, hashcat,
│ ├── tools/ 
# volume-mounted into Kali container at /opt/tools
│ └── loot/ 
# exfil landing zone at /opt/loot
│
├── c2/
│ ├── Dockerfile.sliver 
# Sliver v1.7.3 binary from GitHub releases
│ ├── configs/ 
# Sliver operator config (auto-generated)
│ └── loot/ 
# Sliver download landing zone
│
├── siem/
│ ├── wazuh/
│ │ ├── ossec.conf 
# Wazuh 4.7.0 default manager config (reference copy)
│ │ └── rules/
│ │ └── dragonrx_rules.xml 
# 8 custom rules: 100110-100170
│ │ 
# (installed via docker cp post-startup)
│ └── zeek/
│ ├── entrypoint.sh 
# ★ Bridge detection + Zeek startup (-C flag, /proc/net/route)
│ └── local.zeek 
# Log4Shell JNDI header + long-label DNS detection

Prerequisites

# Hardware minimum
CPU: 8 cores (VT-x/AMD-V required)
RAM: 32 GB (Docker ~10 GB + 3 Windows VMs ~18 GB + headroom)
Disk: 250 GB SSD
# Software - install before running make up
docker >= 24.0
docker compose >= 2.20
vagrant >= 2.4.0
virtualbox >= 7.0
ansible >= 2.16
python3 >= 3.10
# Ansible collections + Python deps
pip3 install pywinrm requests
ansible-galaxy collection install -r ansible/requirements.yml
# requirements.yml covers:
# ansible.windows, community.windows, microsoft.ad,
# community.docker, community.general
# Vagrant plugins
vagrant plugin install vagrant-reload 
# post-domain-join reboots
vagrant plugin install vagrant-hostmanager 
# /etc/hosts management

Vagrantfile

# -*- mode: ruby -*-
# vi: set ft=ruby :
VAGRANTFILE_API_VERSION
 = 
"2"
WINDOWS_BOXES
 = {
  
"DC01"
 => { 
box:
 
"StefanScherer/windows_2019"
, 
ip:
 
"192.168.10.10"
, 
memory:
 
4096
, 
cpus:
 
2
 },
  
"FS01"
 => { 
box:
 
"StefanScherer/windows_2019"
, 
ip:
 
"192.168.10.20"
, 
memory:
 
4096
, 
cpus:
 
2
 },
  
"WS01"
 => { 
box:
 
"StefanScherer/windows_10"
,   
ip:
 
"192.168.10.50"
, 
memory:
 
4096
, 
cpus:
 
2
 },
}
def
 
find_docker_bridge
  
%w[target_net dragonrx]
.each 
do
 |
filter
|
    id = 
`docker network ls --filter name=
#{filter}
 --format "{{.ID}}" 2>/dev/null`
.strip.split.first
    
return
 
"br-
#{id[
0
, 
12
]}
"
 
if
 id && !id.empty?
  
end
  
nil
end
DOCKER_BRIDGE
 = find_docker_bridge
Vagrant
.configure(
VAGRANTFILE_API_VERSION
) 
do
 |
config
|
  config.vagrant.plugins = [
"vagrant-reload"
, 
"vagrant-hostmanager"
]
  
# Ignore the box's packed Vagrantfile — it declares a synced folder and
  
# runs a $username provisioner that fails on newer WinRM/Ruby. We set
  
# all WinRM, network, and provisioner config ourselves.
  config.vm.ignore_box_vagrantfile = 
true
  config.hostmanager.enabled      = 
true
  config.hostmanager.manage_host  = 
false
  config.hostmanager.manage_guest = 
false
  
# Ansible sets hostnames + /etc/hosts
  
WINDOWS_BOXES
.each 
do
 |
name, cfg
|
    config.vm.define name 
do
 |
node
|
      node.vm.box = cfg[
:box
]
      
# No vm.hostname — triggers mid-boot Windows reboot that stalls 15+ min
      
# on the bridged NIC (no DHCP on Docker bridge). Ansible handles it.
      node.vm.synced_folder 
"."
, 
"/vagrant"
, 
disabled:
 
true
      node.vm.communicator       = 
"winrm"
      node.winrm.username        = 
"vagrant"
      node.winrm.password        = 
"vagrant"
      node.winrm.transport       = 
:negotiate
      node.winrm.basic_auth_only = 
false
      node.winrm.retry_limit     = 
20
      node.winrm.retry_delay     = 
10
      
# NIC 1: NAT (internet / WinRM port forwarding)
      
# NIC 2: bridged to Docker target_net bridge — auto_config false so
      
# Vagrant doesn't trigger a reboot trying to set the IP via WinRM.
      
# Static IP is set by the PowerShell provisioner below instead.
      abort 
"Docker target_net bridge not found — run 'docker compose up -d' first."
 
unless
 
DOCKER_BRIDGE
      node.vm.network 
"public_network"
,
        
bridge:
      
DOCKER_BRIDGE
,
        
auto_config:
 
false
      node.vm.provider 
"virtualbox"
 
do
 |
vb
|
        vb.name   = 
"dragonrx_
#{name.downcase}
"
        vb.memory = cfg[
:memory
]
        vb.cpus   = cfg[
:cpus
]
        vb.gui    = 
false
        vb.customize [
"modifyvm"
, 
:id
, 
"--nested-hw-virt"
, 
"on"
]
        vb.customize [
"modifyvm"
, 
:id
, 
"--clipboard"
,      
"bidirectional"
]
      
end
      
# Set static IP on NIC2 (bridged adapter) without triggering a reboot.
      
# Finds NIC2 by excluding the default-route adapter (NIC1 = NAT).
      node.vm.provision 
"shell"
, 
privileged:
 
false
,
        
powershell_elevated_interactive:
 
false
,
        
inline:
 
<<~PS
          $defIdx = (Get-NetRoute -DestinationPrefix '0.0.0.0/0' |
                     Sort-Object RouteMetric | Select-Object -First 1).InterfaceIndex
          $nic2   = Get-NetAdapter |
                    Where-Object { $_.InterfaceIndex -ne $defIdx -and $_.Status -eq 'Up' } |
                    Select-Object -First 1
          if ($nic2) {
              Remove-NetIPAddress  -InterfaceIndex $nic2.InterfaceIndex -Confirm:$false -ErrorAction SilentlyContinue
              Remove-NetRoute      -InterfaceIndex $nic2.InterfaceIndex -Confirm:$false -ErrorAction SilentlyContinue
              New-NetIPAddress     -InterfaceIndex $nic2.InterfaceIndex `
                                   -IPAddress '
#{cfg[
:ip
]}
' -PrefixLength 24
              Write-Host "NIC2 configured: 
#{cfg[
:ip
]}
/24"
          } else {
              Write-Host "WARNING: NIC2 not found (may still be initialising)"
          }
          Write-Host "VM 
#{name}
 ready for Ansible"
        PS
    
end
  
end
end

Vagrant boxes used:

StefanScherer/windows_2019— Windows Server 2019 Datacenter, WinRM pre-enabled, ~9 GB download
StefanScherer/windows_10— Windows 10 22H2, ~8 GB download
Firstvagrant updownloads boxes; subsequent runs use local cache

> NIC2 bridging note: VMs use public_network (not private_network ) so VirtualBox bridges the NIC directly onto the Docker target_net Linux bridge via AF_PACKET. auto_config: false prevents Vagrant from attempting DHCP (there is none on the Docker bridge) or issuing a WinRM reboot mid-boot. The PowerShell provisioner assigns the static IP immediately after boot. No vboxnet0 host-only adapter is used or required.

docker-compose.yml

networks:
  
attacker_net:
    
driver:
 
bridge
    
ipam:
      
config:
        
-
 
subnet:
 
10.0
.0
.0
/24
  
target_net:
    
driver:
 
bridge
    
ipam:
      
config:
        
-
 
subnet:
 
192.168
.10
.0
/24
          
gateway:
 
192.168
.10
.254
services:
  
# ── ATTACKER SIDE ───────────────────────────────────────────────────
  
rxphage_builder:
    
build:
      
context:
 
./attacker
      
dockerfile:
 
Dockerfile.rxphage
    
container_name:
 
dragonrx_rxphage_builder
    
volumes:
      
-
 
./attacker/tools:/output
  
kali:
    
image:
 
kalilinux/kali-rolling:latest
    
container_name:
 
dragonrx_kali
    
hostname:
 
kali
    
networks:
      
attacker_net:
        
ipv4_address:
 
10.0
.0
.5
      
target_net:
        
ipv4_address:
 
192.168
.10
.5
    
tty:
 
true
    
stdin_open:
 
true
    
volumes:
      
-
 
./attacker/tools:/opt/tools
      
-
 
./attacker/loot:/opt/loot
    
cap_add:
 [
NET_ADMIN
, 
NET_RAW
]
    
sysctls:
      
net.ipv4.ip_forward:
 
1
    
depends_on:
      
rxphage_builder:
        
condition:
 
service_completed_successfully
  
sliver_c2:
    
build:
      
context:
 
./c2
      
dockerfile:
 
Dockerfile.sliver
    
image:
 
dragonrx_sliver:local
    
container_name:
 
dragonrx_c2
    
hostname:
 
c2
    
networks:
      
attacker_net:
        
ipv4_address:
 
10.0
.0
.10
    
ports:
      
-
 
"31337:31337"
    
volumes:
      
-
 
./c2/configs:/root/.sliver
      
-
 
./c2/loot:/opt/loot
    
restart:
 
unless-stopped
  
jndi_server:
    
build:
      
context:
 
./jndi
      
dockerfile:
 
Dockerfile.jndi
    
container_name:
 
dragonrx_jndi
    
hostname:
 
jndi
    
networks:
      
attacker_net:
        
ipv4_address:
 
10.0
.0
.20
    
ports:
      
-
 
"1389:1389"
      
-
 
"8888:8080"
  
# ── TARGET SIDE ─────────────────────────────────────────────────────
  
web01:
    
image:
 
ghcr.io/christophetd/log4shell-vulnerable-app:latest
    
container_name:
 
dragonrx_web01
    
hostname:
 
web01
    
networks:
      
attacker_net:
        
ipv4_address:
 
10.0
.0
.100
      
target_net:
        
ipv4_address:
 
192.168
.10
.100
    
ports:
      
-
 
"8080:8080"
    
environment:
      
-
 
DOMAIN_CONTROLLER=192.168.10.10
      
-
 
LDAP_USER=svc_ldap
      
-
 
LDAP_PASS=NovaTech2021!
    
healthcheck:
      
test:
 [
"CMD-SHELL"
, 
"wget -qO- --header='X-Api-Version: health' http://localhost:8080/ >/dev/null 2>&1 || exit 1"
]
      
interval:
 
15s
      
timeout:
 
5s
      
retries:
 
5
  
# ── SOC / DETECTION SIDE ────────────────────────────────────────────
  
wazuh:
    
image:
 
wazuh/wazuh-manager:4.7.0
    
container_name:
 
dragonrx_wazuh
    
hostname:
 
wazuh
    
networks:
      
target_net:
        
ipv4_address:
 
192.168
.10
.200
    
ports:
      
-
 
"1514:1514/tcp"
      
-
 
"1514:1514/udp"
      
-
 
"1515:1515"
      
-
 
"55000:55000"
    
volumes:
      
-
 
wazuh_data:/var/ossec/data
    
healthcheck:
      
test:
 [
"CMD-SHELL"
, 
"pgrep wazuh-analysisd > /dev/null && pgrep wazuh-remoted > /dev/null"
]
      
interval:
 
20s
      
retries:
 
5
  
elasticsearch:
    
image:
 
docker.elastic.co/elasticsearch/elasticsearch:8.11.0
    
container_name:
 
dragonrx_elastic
    
hostname:
 
elastic
    
networks:
      
target_net:
        
ipv4_address:
 
192.168
.10
.202
    
environment:
      
-
 
discovery.type=single-node
      
-
 
xpack.security.enabled=false
      
-
 
ES_JAVA_OPTS=-Xms4g
 
-Xmx4g
    
volumes:
      
-
 
elastic_data:/usr/share/elasticsearch/data
    
healthcheck:
      
test:
 [
"CMD-SHELL"
, 
"curl -sf http://localhost:9200/_cluster/health | grep -v red"
]
      
interval:
 
20s
      
retries:
 
10
  
kibana:
    
image:
 
docker.elastic.co/kibana/kibana:8.11.0
    
container_name:
 
dragonrx_kibana
    
hostname:
 
kibana
    
networks:
      
target_net:
        
ipv4_address:
 
192.168
.10
.203
    
ports:
      
-
 
"5601:5601"
    
environment:
      
-
 
ELASTICSEARCH_HOSTS=http://192.168.10.202:9200
    
depends_on:
      
elasticsearch:
        
condition:
 
service_healthy
  
zeek:
    
image:
 
zeek/zeek:6.2.1
    
container_name:
 
dragonrx_zeek
    
hostname:
 
zeek
    
network_mode:
 
host
    
volumes:
      
-
 
./siem/zeek/local.zeek:/usr/local/zeek/share/zeek/site/local.zeek:ro
      
-
 
./siem/zeek/entrypoint.sh:/entrypoint.sh:ro
      
-
 
zeek_logs:/usr/local/zeek/logs
    
cap_add:
 [
NET_ADMIN
, 
NET_RAW
]
    
command:
 [
"/bin/sh"
, 
"/entrypoint.sh"
]
volumes:
  
wazuh_data:
  
elastic_data:
  
zeek_logs:

Ansible

ansible/requirements.yml

collections:
  
-
 
name:
 
ansible.windows
    
version:
 
">=2.3.0"
  
-
 
name:
 
community.windows
    
version:
 
">=2.2.0"
  
-
 
name:
 
microsoft.ad
    
version:
 
">=1.5.0"
  
-
 
name:
 
community.docker
    
version:
 
">=3.6.0"
  
-
 
name:
 
community.general
    
version:
 
">=8.0.0"

ansible/ansible.cfg

[defaults]
inventory
          = inventory/hosts.ini
roles_path
         = roles
stdout_callback
    = yaml
timeout
            = 
60
host_key_checking
  = 
False
[winrm]
transport
          = basic
server_cert_validation
 = ignore

ansible/inventory/hosts.ini

[docker_linux]
web01    ansible_host=192.168.10.100  ansible_connection=docker  ansible_docker_extra_args=
"-u root"
  ansible_container=dragonrx_web01
kali     ansible_host=10.0.0.5       ansible_connection=docker  ansible_container=dragonrx_kali
[windows]
dc01     ansible_host=192.168.10.10
fs01     ansible_host=192.168.10.20
ws01     ansible_host=192.168.10.50
[all:vars]
domain_name=novatech.local
domain_netbios=NOVATECH
domain_controller_ip=192.168.10.10

ansible/inventory/group_vars/windows.yml

ansible_user:
 vagrant
ansible_password:
 vagrant
ansible_connection:
 winrm
ansible_winrm_transport:
 basic
ansible_winrm_server_cert_validation:
 ignore
ansible_winrm_port:
 
5985
ansible_winrm_read_timeout_sec:
 
120
ansible_winrm_operation_timeout_sec:
 
90
ansible_become:
 
false
domain_admin_user:
 Administrator
domain_admin_password:
 
"NovaTech_Admin2024!"
safe_mode_password:
 
"DragonRx2024!"

> WinRM transport note: basic is required. pywinrm 0.4.x lists ntlm (not negotiate ) in its supported auth types, and OpenSSL 3.x removed the MD4 hash that NTLM depends on. basic over plain HTTP port 5985 works reliably with the StefanScherer Vagrant boxes.

ansible/inventory/group_vars/all.yml

lab_users:
  
-
 
name:
 
jsmith
    
password:
 
"Research#2024"
    
department:
 
"R&D"
    
local_admin_on:
 
ws01
  
-
 
name:
 
svc_ldap
    
password:
 
"NovaTech2021!"
    
description:
 
"LDAP service account — creds leaked in context.xml"
    
password_never_expires:
 
true
  
-
 
name:
 
svc_backup
    
password:
 
"Backup_Svc99!"
    
description:
 
"Kerberoastable backup service account"
    
password_never_expires:
 
true
    
spn:
 
"MSSQLSvc/fs01.novatech.local:1433"
    
member_of:
 
"Backup Operators"
# VMs cannot reach the Wazuh container IP (192.168.10.200) directly due to
# VirtualBox bridge FDB behavior. Use the host bridge IP (192.168.10.254)
# instead — docker-proxy forwards TCP 1514/1515 to the container.
wazuh_manager_ip:
 
192.168
.10
.254
sysmon_version:
 
"15.0"
sysmon_sha256:
 
""

> Wazuh manager IP note: VirtualBox bridges NICs via AF_PACKET sockets. The Linux bridge FDB never learns VM MACs from AF_PACKET injections, so SYN-ACKs from the Wazuh container (192.168.10.200) are flooded to bridge ports but never delivered back to the VM’s AF_PACKET socket — producing Zeek S1/Sh state (SYN sent, no ACK). Using the host bridge IP (192.168.10.254) routes Wazuh agent traffic through docker-proxy , which handles the TCP return path through the host TCP stack correctly.

Ansible Roles

roles/dc01/tasks/main.yml

---
-
 
name:
 
Install
 
AD
 
DS
 
role
  
ansible.windows.win_feature:
    
name:
 
AD-Domain-Services
    
include_management_tools:
 
true
    
state:
 
present
  
register:
 
ad_feature
-
 
name:
 
Reboot
 
after
 
AD
 
DS
 
install
  
ansible.windows.win_reboot:
    
reboot_timeout:
 
300
    
post_reboot_delay:
 
30
  
when:
 
ad_feature.reboot_required
-
 
name:
 
Set
 
local
 
Administrator
 
password
 
(required
 
before
 
DC
 
promotion)
  
ansible.windows.win_user:
    
name:
 
Administrator
    
password:
 
"
{{ domain_admin_password }}
"
    
state:
 
present
-
 
name:
 
Promote
 
to
 
Domain
 
Controller
  
microsoft.ad.domain:
    
dns_domain_name:
 
"
{{ domain_name }}
"
    
domain_netbios_name:
 
"
{{ domain_netbios }}
"
    
safe_mode_password:
 
"
{{ safe_mode_password }}
"
    
reboot:
 
false
  
register:
 
domain_result
-
 
name:
 
Reboot
 
after
 
domain
 
promotion
  
ansible.windows.win_reboot:
    
reboot_timeout:
 
1200
    
post_reboot_delay:
 
120
    
connect_timeout:
 
60
  
when:
 
domain_result.changed
 
or
 
domain_result.reboot_required
 
|
 
default(false)
-
 
name:
 
Wait
 
for
 
AD
 
web
 
services
  
ansible.windows.win_wait_for:
    
port:
 
389
    
host:
 
127.0
.0
.1
    
timeout:
 
120
-
 
name:
 
Create
 
domain
 
users
  
microsoft.ad.user:
    
name:
 
"
{{ item.name }}
"
    
sam_account_name:
 
"
{{ item.name }}
"
    
password:
 
"
{{ item.password }}
"
    
password_never_expires:
 
"
{{ item.password_never_expires | default(false) }}
"
    
description:
 
"
{{ item.description | default(omit) }}
"
    
enabled:
 
true
    
state:
 
present
  
loop:
 
"
{{ lab_users }}
"
-
 
name:
 
Set
 
SPN
 
on
 
svc_backup
 
(Kerberoastable)
  
ansible.windows.win_powershell:
    
script:
 
|
      $spn  = "{{ item.spn }}"
      $acct = "{{ domain_netbios }}\{{ item.name }}"
      $existing = & setspn -L "{{ item.name }}" 2>&1
      if ($existing -notmatch [regex]::Escape($spn)) {
          & setspn -S $spn $acct
          Write-Output "SPN set: $spn on $acct"
      } else {
          Write-Output "SPN already present: $spn"
      }
  
loop:
 
"
{{ lab_users | selectattr('spn', 'defined') | list }}
"
-
 
name:
 
Add
 
svc_backup
 
to
 
Backup
 
Operators
  
ansible.windows.win_powershell:
    
script:
 
|
      $members = (Get-ADGroupMember "Backup Operators").SamAccountName
      if ($members -notcontains "svc_backup") {
          Add-ADGroupMember -Identity "Backup Operators" -Members "svc_backup"
          Write-Output "Added svc_backup to Backup Operators"
      } else {
          Write-Output "svc_backup already in Backup Operators"
      }
-
 
name:
 
Enable
 
Directory
 
Service
 
Access
 
auditing
 
(required
 
for
 
DCSync
 
EID
 
4662
)
  
ansible.windows.win_command:
 
>
    auditpol /set /subcategory:"Directory Service Access" /success:enable /failure:enable
-
 
name:
 
Set
 
SACL
 
on
 
domain
 
NC
 
for
 
DCSync
 
detection
  
ansible.windows.win_powershell:
    
script:
 
|
      $rootDSE   = [ADSI]"LDAP://RootDSE"
      $defaultNC = $rootDSE.defaultNamingContext
      $acl       = (Get-Acl "AD:\$defaultNC")
      $identity  = [System.Security.Principal.NTAccount]"Everyone"
      $adRights  = [System.DirectoryServices.ActiveDirectoryRights]"ExtendedRight"
      $type      = [System.Security.AccessControl.AccessControlType]"Success"
      $inherit   = [System.DirectoryServices.ActiveDirectorySecurityInheritance]"All"
      $guidAll   = [guid]"1131f6ad-9c07-11d1-f79f-00c04fc2dcd2"
      $ace = New-Object System.DirectoryServices.ActiveDirectoryAuditRule(
          $identity, $adRights, $type, $guidAll, $inherit)
      $acl.AddAuditRule($ace)
      Set-Acl "AD:\$defaultNC" $acl
      Write-Output "SACL configured for DCSync detection (EID 4662)"
-
 
name:
 
Set
 
DNS
 
forwarder
  
ansible.windows.win_powershell:
    
script:
 
|
      
Set-DnsServerForwarder
 
-IPAddress
 
"8.8.8.8"
 
-PassThru

> DC promotion notes:

Therebootflag is set tofalseso Ansible controls the reboot window.reboot_timeout: 1200is needed — DC promotion + AD DS initialization takes several minutes post-reboot.
microsoft.ad.domaindoes not accept astateparameter; idempotency is handled by the module internally.
The local Administrator password must be set beforeDCPromoor promotion exits with code 94 (blank password rejected).

roles/fs01/tasks/main.yml

---
-
 
name:
 
Wait
 
for
 
DC01
 
LDAP
  
ansible.windows.win_wait_for:
    
host:
 
"
{{ domain_controller_ip }}
"
    
port:
 
389
    
timeout:
 
300
-
 
name:
 
Set
 
DNS
 
to
 
DC01
 
on
 
target_net
 
NIC
 
(required
 
for
 
domain
 
join)
  
ansible.windows.win_powershell:
    
script:
 
|
      $defIdx = (Get-NetRoute -DestinationPrefix '0.0.0.0/0' |
                 Sort-Object RouteMetric | Select-Object -First 1).InterfaceIndex
      $nic2 = Get-NetAdapter |
              Where-Object { $_.InterfaceIndex -ne $defIdx -and $_.Status -eq 'Up' } |
              Select-Object -First 1
      if ($nic2) {
          Set-DnsClientServerAddress -InterfaceIndex $nic2.InterfaceIndex `
              -ServerAddresses "{{ domain_controller_ip }}"
          Write-Output "DNS set to {{ domain_controller_ip }} on $($nic2.Name)"
      } else {
          throw "NIC2 not found — cannot set DNS"
      }
-
 
name:
 
Join
 
domain
  
microsoft.ad.membership:
    
dns_domain_name:
 
"
{{ domain_name }}
"
    
domain_admin_user:
 
"
{{ domain_netbios }}
\\
{{ domain_admin_user }}
"
    
domain_admin_password:
 
"
{{ domain_admin_password }}
"
    
state:
 
domain
  
register:
 
domain_join
-
 
name:
 
Reboot
 
after
 
domain
 
join
  
ansible.windows.win_reboot:
    
reboot_timeout:
 
300
  
when:
 
domain_join.changed
-
 
name:
 
Create
 
crown
 
jewel
 
directories
  
ansible.windows.win_file:
    
path:
 
"
{{ item }}
"
    
state:
 
directory
  
loop:
    
-
 
C:\Research
    
-
 
C:\Manufacturing
    
-
 
C:\SYSVOL_backup
-
 
name:
 
Generate
 
dummy
 
Phase
 
III
 
trial
 
data
  
ansible.windows.win_powershell:
    
script:
 
|
      1..30 | ForEach-Object {
        $content = "Phase III Antiviral Trial Data - Subject ID: $_ - Visit: $(Get-Date -Format yyyy-MM-dd)"
        $content | Out-File "C:\Research\clinical_data_record_$_.csv" -Encoding UTF8
      }
      1..15 | ForEach-Object {
        $content = "Proprietary Synthesis Process v2.3 - Batch $_ - CONFIDENTIAL"
        $content | Out-File "C:\Manufacturing\synthesis_process_$_.docx" -Encoding UTF8
      }
      "NovaTech Phase III NDA Filing 2026 - RESTRICTED" | Out-File "C:\Research\NDA_filing_2026.pdf" -Encoding UTF8
      Write-Output "Crown jewel data created"
-
 
name:
 
Create
 
SMB
 
shares
  
ansible.windows.win_share:
    
name:
 
"
{{ item.name }}
"
    
path:
 
"
{{ item.path }}
"
    
full:
 
"
{{ item.full }}
"
    
read:
 
"
{{ item.read }}
"
    
state:
 
present
  
loop:
    
-
 
name:
 
Research
      
path:
 
C:\Research
      
full:
 
"NOVATECH\\jsmith"
      
read:
 
"NOVATECH\\Domain Users"
    
-
 
name:
 
Manufacturing
      
path:
 
C:\Manufacturing
      
full:
 
"NOVATECH\\Administrator"
      
read:
 
"NOVATECH\\jsmith"

> DNS pre-join note: NIC2 (the host-only 192.168.10.0/24 adapter) must resolve novatech.local before the domain join module runs. Setting DNS to DC01 on NIC2 before calling microsoft.ad.membership is required — without it the join fails with "domain does not exist or could not be contacted."

roles/ws01/tasks/main.yml

---
-
 
name:
 
Wait
 
for
 
DC01
 
LDAP
  
ansible.windows.win_wait_for:
    
host:
 
"
{{ domain_controller_ip }}
"
    
port:
 
389
    
timeout:
 
300
-
 
name:
 
Set
 
DNS
 
to
 
DC01
 
on
 
target_net
 
NIC
 
(required
 
for
 
domain
 
join)
  
ansible.windows.win_powershell:
    
script:
 
|
      $defIdx = (Get-NetRoute -DestinationPrefix '0.0.0.0/0' |
                 Sort-Object RouteMetric | Select-Object -First 1).InterfaceIndex
      $nic2 = Get-NetAdapter |
              Where-Object { $_.InterfaceIndex -ne $defIdx -and $_.Status -eq 'Up' } |
              Select-Object -First 1
      if ($nic2) {
          Set-DnsClientServerAddress -InterfaceIndex $nic2.InterfaceIndex `
              -ServerAddresses "{{ domain_controller_ip }}"
          Write-Output "DNS set to {{ domain_controller_ip }} on $($nic2.Name)"
      } else {
          throw "NIC2 not found — cannot set DNS"
      }
-
 
name:
 
Join
 
domain
  
microsoft.ad.membership:
    
dns_domain_name:
 
"
{{ domain_name }}
"
    
domain_admin_user:
 
"
{{ domain_netbios }}
\\
{{ domain_admin_user }}
"
    
domain_admin_password:
 
"
{{ domain_admin_password }}
"
    
state:
 
domain
  
register:
 
domain_join
-
 
name:
 
Reboot
 
after
 
domain
 
join
  
ansible.windows.win_reboot:
    
reboot_timeout:
 
300
  
when:
 
domain_join.changed
-
 
name:
 
Enable
 
SMB
 
and
 
set
 
target_net
 
NIC
 
to
 
Private
 
profile
  
ansible.windows.win_powershell:
    
script:
 
|
      Enable-NetFirewallRule -DisplayGroup "File and Printer Sharing"
      $defIdx = (Get-NetRoute -DestinationPrefix '0.0.0.0/0' |
                 Sort-Object RouteMetric | Select-Object -First 1).InterfaceIndex
      $nic2 = Get-NetAdapter |
              Where-Object { $_.InterfaceIndex -ne $defIdx -and $_.Status -eq 'Up' } |
              Select-Object -First 1
      if ($nic2) {
          Set-NetConnectionProfile -InterfaceIndex $nic2.InterfaceIndex -NetworkCategory Private -ErrorAction SilentlyContinue
      }
-
 
name:
 
Add
 
jsmith
 
as
 
local
 
administrator
  
ansible.windows.win_group_membership:
    
name:
 
Administrators
    
members:
 [
"NOVATECH\\jsmith"
]
    
state:
 
present
-
 
name:
 
Create
 
C:\Temp
 
for
 
staging
 
artifacts
  
ansible.windows.win_file:
    
path:
 
C:\Temp
    
state: directorySMB firewall note:
 
Windows
 
10
 
disables
 
File
 
and
 
Printer
 
Sharing
 
by
 
default,
 
and
 
the
 
Docker
 
bridge
 
NIC
 
gets
 
a
 
“Public”
 
network
 
profile
 
which
 
blocks
 
SMB.
 
Enable-NetFirewallRule
 
opens
 
the
 
rule
 
for
 
all
 
profiles;
 
Set-NetConnectionProfile
 
downgrades
 
the
 
lab
 
NIC
 
to
 
Private
 
so
 
Windows
 
Security
 
Center
 
stops
 
complaining.

roles/wazuh_agent/tasks/main.yml

---
# Remove any stale agent record for this hostname so re-enrollment isn't blocked
# by Wazuh's "not disconnected long enough" guard after container recreation.
-
 
name:
 
Remove
 
stale
 
Wazuh
 
agent
 
record
 
(idempotent
 
pre-enroll
 
cleanup)
  
delegate_to:
 
localhost
  
ansible.builtin.shell:
 
|
    TOKEN=$(curl -sk -u wazuh:wazuh -X POST \
      https://127.0.0.1:55000/security/user/authenticate \
      | python3 -c "import sys,json; print(json.load(sys.stdin)['data']['token'])")
    ID=$(curl -sk -H "Authorization: Bearer $TOKEN" \
      "https://127.0.0.1:55000/agents?name={{ inventory_hostname }}" \
      | python3 -c "import sys,json; items=json.load(sys.stdin)['data']['affected_items']; print(items[0]['id'] if items else '')")
    if [ -n "$ID" ]; then
      curl -sk -X DELETE -H "Authorization: Bearer $TOKEN" \
        "https://127.0.0.1:55000/agents?agents_list=$ID&status=all&older_than=0s" >/dev/null
      echo "Removed stale agent $ID for {{ inventory_hostname }}"
    else
      echo "No stale agent record for {{ inventory_hostname }}"
    fi
  
changed_when:
 
false
-
 
name:
 
Ensure
 
C:\Temp
 
exists
  
ansible.windows.win_file:
    
path:
 
C:\Temp
    
state:
 
directory
-
 
name:
 
Download
 
Wazuh
 
agent
 
MSI
  
ansible.windows.win_get_url:
    
url:
 
"https://packages.wazuh.com/4.x/windows/wazuh-agent-4.7.0-1.msi"
    
dest:
 
C:\Temp\wazuh-agent.msi
-
 
name:
 
Install
 
Wazuh
 
agent
  
ansible.windows.win_package:
    
path:
 
C:\Temp\wazuh-agent.msi
    
product_id:
 
"{54E68B4D-3C4E-4D9C-8E65-C4A62C6B9E7A}"
    
arguments:
 
>-
      WAZUH_MANAGER="{{ wazuh_manager_ip }}"
      WAZUH_REGISTRATION_SERVER="{{ wazuh_manager_ip }}"
      WAZUH_AGENT_NAME="{{ inventory_hostname }}"
    
state:
 
present
-
 
name:
 
Start
 
and
 
enable
 
Wazuh
 
agent
  
ansible.windows.win_service:
    
name:
 
WazuhSvc
    
state:
 
started
    
start_mode:
 
auto

> Stale agent cleanup note: After docker compose down -v and up , Wazuh starts fresh with no agent records. But if the manager container is recreated while VMs are still enrolled, Wazuh rejects re-registration with "Duplicate name — not disconnected long enough" (default agents_disconnection_time is 10 min). The pre-enroll API DELETE clears the record immediately so re-deploy works without a 10-minute wait.

Master Deploy Playbook

ansible/playbooks/deploy.yml

---
# Operation DragonRx — Full Lab Deploy
# Usage: ansible-playbook ansible/playbooks/deploy.yml
# Run after: docker compose up -d && vagrant up
-
 
name:
 
"Phase 1 — Verify Docker services healthy"
  
hosts:
 
localhost
  
gather_facts:
 
false
  
tasks:
    
-
 
name:
 
Wait
 
for
 
Wazuh
 
manager
 
API
      
ansible.builtin.wait_for:
        
host:
 
127.0
.0
.1
        
port:
 
55000
        
timeout:
 
120
    
-
 
name:
 
Wait
 
for
 
Kibana
 
(implicitly
 
confirms
 
Elasticsearch)
      
ansible.builtin.uri:
        
url:
 
http://localhost:5601/api/status
        
status_code:
 
200
      
register:
 
kibana_health
      
until:
 
kibana_health.status
 
==
 
200
      
retries:
 
30
      
delay:
 
10
-
 
name:
 
"Phase 2 — Configure DC01 (Active Directory)"
  
hosts:
 
dc01
  
gather_facts:
 
true
  
pre_tasks:
    
-
 
name:
 
Set
 
computer
 
name
 
to
 
DC01
      
ansible.windows.win_hostname:
        
name:
 
DC01
      
register:
 
dc01_name
    
-
 
name:
 
Reboot
 
if
 
hostname
 
changed
      
ansible.windows.win_reboot:
        
reboot_timeout:
 
300
        
post_reboot_delay:
 
30
      
when:
 
dc01_name.reboot_required
  
roles:
    
-
 
dc01
    
-
 
wazuh_agent
-
 
name:
 
"Phase 3 — Configure FS01 (File Server)"
  
hosts:
 
fs01
  
gather_facts:
 
true
  
pre_tasks:
    
-
 
name:
 
Set
 
computer
 
name
 
to
 
FS01
      
ansible.windows.win_hostname:
        
name:
 
FS01
      
register:
 
fs01_name
    
-
 
name:
 
Reboot
 
if
 
hostname
 
changed
      
ansible.windows.win_reboot:
        
reboot_timeout:
 
300
        
post_reboot_delay:
 
30
      
when:
 
fs01_name.reboot_required
  
roles:
    
-
 
fs01
    
-
 
wazuh_agent
-
 
name:
 
"Phase 4 — Configure WS01 (Workstation)"
  
hosts:
 
ws01
  
gather_facts:
 
true
  
pre_tasks:
    
-
 
name:
 
Set
 
computer
 
name
 
to
 
WS01
      
ansible.windows.win_hostname:
        
name:
 
WS01
      
register:
 
ws01_name
    
-
 
name:
 
Reboot
 
if
 
hostname
 
changed
      
ansible.windows.win_reboot:
        
reboot_timeout:
 
300
        
post_reboot_delay:
 
30
      
when:
 
ws01_name.reboot_required
  
roles:
    
-
 
ws01
    
-
 
wazuh_agent
-
 
name:
 
"Phase 5 — Configure SIEM indexes"
  
hosts:
 
localhost
  
gather_facts:
 
false
  
tasks:
    
-
 
name:
 
Create
 
Kibana
 
index
 
pattern
 
for
 
Wazuh
      
ansible.builtin.uri:
        
url:
 
http://localhost:5601/api/saved_objects/index-pattern
        
method:
 
POST
        
headers:
          
Content-Type:
 
application/json
          
kbn-xsrf:
 
"true"
        
body_format:
 
json
        
body:
          
attributes:
            
title:
 
"wazuh-alerts-*"
            
timeFieldName:
 
"@timestamp"
        
status_code:
 [
200
, 
409
]
    
-
 
name:
 
Create
 
Kibana
 
index
 
pattern
 
for
 
Zeek
      
ansible.builtin.uri:
        
url:
 
http://localhost:5601/api/saved_objects/index-pattern
        
method:
 
POST
        
headers:
          
Content-Type:
 
application/json
          
kbn-xsrf:
 
"true"
        
body_format:
 
json
        
body:
          
attributes:
            
title:
 
"zeek-*"
            
timeFieldName:
 
"@timestamp"
        
status_code:
 [
200
, 
409
]
-
 
name:
 
"Phase 6 — Run smoke tests"
  
import_playbook:
 
test.yml

Test Playbook

ansible/playbooks/test.yml

---
# Smoke tests + detection validation
# Usage: ansible-playbook ansible/playbooks/test.yml
-
 
name:
 
"Test 1 — Network connectivity"
  
hosts:
 
localhost
  
gather_facts:
 
false
  
vars:
    
connectivity_checks:
      
-
 {
host:
 
127.0
.0
.1
,       
port:
 
8080
, 
name:
 
"WEB01 patient portal"
}
      
-
 {
host:
 
192.168
.10
.10
,   
port:
 
389
,  
name:
 
"DC01 LDAP"
}
      
-
 {
host:
 
192.168
.10
.10
,   
port:
 
445
,  
name:
 
"DC01 SMB"
}
      
-
 {
host:
 
192.168
.10
.20
,   
port:
 
445
,  
name:
 
"FS01 SMB"
}
      
-
 {
host:
 
192.168
.10
.50
,   
port:
 
445
,  
name:
 
"WS01 SMB"
}
      
-
 {
host:
 
127.0
.0
.1
,       
port:
 
1515
, 
name:
 
"Wazuh enrollment"
}
      
-
 {
host:
 
192.168
.10
.202
,  
port:
 
9200
, 
name:
 
"Elasticsearch"
}
      
-
 {
host:
 
127.0
.0
.1
,       
port:
 
5601
, 
name:
 
"Kibana"
}
      
-
 {
host:
 
127.0
.0
.1
,       
port:
 
1389
, 
name:
 
"JNDI LDAP server"
}
      
-
 {
host:
 
127.0
.0
.1
,       
port:
 
8888
, 
name:
 
"JNDI payload server"
}
  
tasks:
    
-
 
name:
 
Check
 
TCP
 
connectivity
 
to
 
all
 
services
      
ansible.builtin.wait_for:
        
host:
 
"
{{ item.host }}
"
        
port:
 
"
{{ item.port }}
"
        
timeout:
 
30
      
loop:
 
"
{{ connectivity_checks }}
"
      
loop_control:
        
label:
 
"
{{ item.name }}
"
-
 
name:
 
"Test 2 — Windows services"
  
hosts:
 
windows
  
gather_facts:
 
false
  
tasks:
    
-
 
name:
 
Verify
 
Wazuh
 
agent
 
running
      
ansible.windows.win_service_info:
        
name:
 
WazuhSvc
      
register:
 
wazuh_info
      
failed_when:
 
wazuh_info.services
 
|
 
length
 
==
 
0
 
or
 
wazuh_info.services[0].state
 
!=
 
"started"
-
 
name:
 
"Test 3 — Active Directory state"
  
hosts:
 
dc01
  
gather_facts:
 
false
  
tasks:
    
-
 
name:
 
Verify
 
domain
 
functional
      
ansible.windows.win_powershell:
        
script:
 
|
          $domain = Get-ADDomain -ErrorAction Stop
          if ($domain.DNSRoot -ne "novatech.local") {
            Write-Error "Domain mismatch: $($domain.DNSRoot)"; exit 1
          }
          Write-Output "Domain OK: $($domain.DNSRoot)"
    
-
 
name:
 
Verify
 
all
 
lab
 
users
 
present
      
ansible.windows.win_powershell:
        
script:
 
|
          $users = @("jsmith", "svc_ldap", "svc_backup")
          foreach ($u in $users) {
            if (-not (Get-ADUser $u -ErrorAction SilentlyContinue)) {
              Write-Error "Missing user: $u"; exit 1
            }
          }
          Write-Output "All lab users present"
    
-
 
name:
 
Verify
 
svc_backup
 
SPN
 
set
 
(Kerberoastable)
      
ansible.windows.win_powershell:
        
script:
 
|
          $spns = (Get-ADUser svc_backup -Properties ServicePrincipalNames).ServicePrincipalNames
          if ($spns -notcontains "MSSQLSvc/fs01.novatech.local:1433") {
            Write-Error "Kerberoastable SPN missing"; exit 1
          }
          Write-Output "SPN OK: $spns"
    
-
 
name:
 
Verify
 
Directory
 
Service
 
Access
 
auditing
 
enabled
      
ansible.windows.win_powershell:
        
script:
 
|
          $result = auditpol /get /subcategory:"Directory Service Access"
          if ($result -notmatch "Success") {
            Write-Error "DS Access auditing not enabled — EID 4662 will not fire"; exit 1
          }
          Write-Output "Audit policy OK"
-
 
name:
 
"Test 4 — Detection validation (fire test payloads)"
  
hosts:
 
localhost
  
gather_facts:
 
false
  
tasks:
    
-
 
name:
 
Fire
 
JNDI
 
DNS
 
probe
 
(benign
 
—
 
no
 
code
 
execution)
      
ansible.builtin.uri:
        
url:
 
http://192.168.10.100:8080/
        
method:
 
GET
        
headers:
          
X-Api-Version:
 
"${jndi:dns://10.0.0.20/test-probe}"
        
validate_certs:
 
false
        
status_code:
 [
200
, 
400
, 
401
, 
500
]
      
register:
 
probe_result
    
-
 
name:
 
Wait
 
10
 
seconds
 
for
 
Zeek
 
to
 
process
      
ansible.builtin.pause:
        
seconds:
 
10
    
-
 
name:
 
Check
 
Zeek
 
raised
 
Log4Shell
 
NOTICE
      
ansible.builtin.shell:
 
|
        docker exec dragonrx_zeek sh -c \
          'grep -l "Log4Shell" notice.log 2>/dev/null | head -1'
      
register:
 
zeek_detection
      
delegate_to:
 
localhost
      
failed_when:
 
zeek_detection.stdout
 
==
 
""
      
changed_when:
 
false
    
-
 
name:
 
Wait
 
for
 
Wazuh
 
Windows
 
agents
 
to
 
enroll
 
(up
 
to
 
3
 
min
 
after
 
fresh
 
deploy)
      
ansible.builtin.shell:
 
|
        TOKEN=$(curl -sk -u wazuh:wazuh -X POST \
          https://127.0.0.1:55000/security/user/authenticate \
          | python3 -c "import sys,json; print(json.load(sys.stdin)['data']['token'])")
        curl -sk -H "Authorization: Bearer $TOKEN" \
          "https://127.0.0.1:55000/agents?status=active&os.platform=windows" \
          | python3 -c "import sys,json; print(json.load(sys.stdin)['data']['total_affected_items'])"
      
register:
 
wazuh_agents
      
until:
 
wazuh_agents.stdout
 
|
 
int
 
>
 
0
      
retries:
 
12
      
delay:
 
15
      
changed_when:
 
false
      
failed_when:
 
wazuh_agents.stdout
 
|
 
int
 
==
 
0
    
-
 
name:
 
"DETECTION REPORT"
      
ansible.builtin.debug:
        
msg:
          
-
 
"JNDI probe HTTP status : 
{{ probe_result.status }}
"
          
-
 
"Zeek notice.log        : 
{{ zeek_detection.stdout | default('NOT DETECTED') }}
"
          
-
 
"Wazuh active Windows   : 
{{ wazuh_agents.stdout }}
"

> Test notes:

Zeek check:grep -l "Log4Shell" notice.logchecks the actual NOTICE string written bylocal.zeek. Avoidgrep -i "jndi" *.log— Zeek's random connection UIDs (e.g.CIikJNDIbKGxdH7Gl) contain "JNDI" and produce false positives.
**Wazuh check:**Uses the Wazuh REST API (JWT auth) withretries: 12, delay: 15(3-minute window). Elasticsearch is not used here — no Filebeat/forwarder is configured, sowazuh-alerts-*indices may be empty. The shell task re-fetches the JWT on each retry so it doesn't expire mid-loop.

Zeek Config

siem/zeek/entrypoint.sh

#!/bin/sh
set
 -e
# Parse /proc/net/route (no iproute2 required) to find the lab bridge interface.
# Destinations are stored as little-endian hex:
#   192.168.10.0/24  = 000AA8C0  (target network - priority: probe + Windows VMs)
#   10.0.0.0/24      = 0000000A  (attacker network - fallback)
IFACE=$(awk 
'$2 == "000AA8C0" {print $1; exit}'
 /proc/net/route)
[ -z 
"
$IFACE
"
 ] && IFACE=$(awk 
'$2 == "0000000A" {print $1; exit}'
 /proc/net/route)
[ -z 
"
$IFACE
"
 ] && IFACE=
"any"
echo
 
"[zeek] Capturing on: 
$IFACE
"
exec
 zeek -C -i 
"
$IFACE
"
 /usr/local/zeek/share/zeek/site/local.zeek

> Why this file exists:

zeek -i anyonly captures traffic on whatever the kernel routes first — on this host that was the WiFi interface (192.168.1.x internet traffic), not the Docker bridge. The Docker bridge must be specified explicitly.
Thezeek:6.2.1image has noip/iproute2binary./proc/net/routeprovides interface → destination routing without any tools (awk is in busybox).
The-Cflag skips checksum validation. Docker bridge packets have placeholder TCP checksums from NIC offloading; without-C, Zeek silently discards all bridge packets and only logs areporter.logwarning.
Zeek 6.2.1 accepts only a single-iflag;target_net(192.168.10.0/24) is tried first because it carries both JNDI probes and Windows VM traffic.

siem/zeek/local.zeek

@load base/protocols/http
@load base/protocols/dns
@load base/protocols/ssl
@load base/protocols/smb
# Log4Shell JNDI detection
event 
http_header
(
c
: connection, 
is_orig
: 
bool
, 
name
: 
string
, 
value
: 
string
) {
    
if
 ( is_orig && /\$\{[a-zA-Z0-
9
_\-:\/\.]*jndi[a-zA-Z0-
9
_\-:\/\.]*:/ in value ) {
        
NOTICE
([
$note
=
Notice
::
LOG
, 
$conn
=c,
                
$msg
=
fmt
(
"Log4Shell JNDI in header %s: %s"
, name, value),
                
$identifier
=
cat
(c
$id
)]);
    }
}
# DNS tunnel heuristic - labels >40 chars are characteristic of data-exfil tunnels
# (legitimate public labels rarely exceed 30 chars)
event 
dns_request
(
c
: connection, 
msg
: dns_msg, 
query
: 
string
, 
qtype
: count, 
qclass
: count) {
    local parts = 
split_string
(query, /\./);
    
if
 ( |parts| > 
0
 ) {
        local first_label = parts[
0
];
        
if
 ( |first_label| > 
40
 )
            
NOTICE
([
$note
=
Notice
::
LOG
, 
$conn
=c,
                    
$msg
=
fmt
(
"Suspicious long DNS label (tunnel?): %s"
, query),
                    
$identifier
=
cat
(c
$id
)]);
    }
}

Host Networking Setup

scripts/setup_routing.sh

#!/usr/bin/env bash
# Enable IP forwarding and iptables rules so the attacker network
# (10.0.0.0/24) can reach the target network (192.168.10.0/24).
#
# VMs bridge directly onto the Docker target_net bridge (see Vagrantfile),
# so no host-only adapter or vboxnet0 configuration is needed here.
#
# Run once: after 'docker compose up -d', before 'vagrant up'.
set
 -euo pipefail
RED=
'\033[0;31m'
; GRN=
'\033[0;32m'
; NC=
'\033[0m'
info
()  { 
echo
 -e 
"
${GRN}
[*]
${NC}
 $*"
; }
error
() { 
echo
 -e 
"
${RED}
[!]
${NC}
 $*"
 >&2; 
exit
 1; }
# ── VirtualBox network policy (6.1.28+) ──────────────────────────────────────
# Allow 192.168.10.0/24 so VBox doesn't reject bridge/host-only config calls.
if
 ! grep -qsE 
'^\*|192\.168\.10'
 /etc/vbox/networks.conf 2>/dev/null; 
then
    info 
"Whitelisting 192.168.10.0/24 in VirtualBox network policy..."
    sudo 
mkdir
 -p /etc/vbox
    
echo
 
"* 192.168.10.0/24 ::/0"
 | sudo 
tee
 /etc/vbox/networks.conf >/dev/null
fi
# ── IP forwarding ─────────────────────────────────────────────────────────────
info 
"Enabling IP forwarding..."
sudo sysctl -w net.ipv4.ip_forward=1 >/dev/null
echo
 
"net.ipv4.ip_forward=1"
 | sudo 
tee
 /etc/sysctl.d/99-dragonrx.conf >/dev/null
# ── Locate Docker bridges ─────────────────────────────────────────────────────
info 
"Locating Docker network bridges..."
ATK_NET_ID=$(docker network 
ls
 --filter name=attacker_net --format 
"{{.ID}}"
 | 
head
 -1)
[[ -z 
"
$ATK_NET_ID
"
 ]] && error 
"attacker_net bridge not found — run 'docker compose up -d' first"
ATK_BRIDGE=
"br-
${ATK_NET_ID:0:12}
"
TGT_NET_ID=$(docker network 
ls
 --filter name=target_net --format 
"{{.ID}}"
 | 
head
 -1)
[[ -z 
"
$TGT_NET_ID
"
 ]] && error 
"target_net bridge not found — run 'docker compose up -d' first"
TGT_BRIDGE=
"br-
${TGT_NET_ID:0:12}
"
info 
"Attacker bridge : 
$ATK_BRIDGE
  (10.0.0.0/24)"
info 
"Target bridge   : 
$TGT_BRIDGE
  (192.168.10.0/24)"
# ── iptables forwarding between the two bridges ───────────────────────────────
info 
"Adding iptables FORWARD rules (attacker ↔ target)..."
sudo iptables -I FORWARD -i 
"
$ATK_BRIDGE
"
 -o 
"
$TGT_BRIDGE
"
 -j ACCEPT 2>/dev/null || 
true
sudo iptables -I FORWARD -i 
"
$TGT_BRIDGE
"
 -o 
"
$ATK_BRIDGE
"
 -j ACCEPT 2>/dev/null || 
true
sudo iptables -t nat -I POSTROUTING -s 10.0.0.0/24     -d 192.168.10.0/24 -j MASQUERADE 2>/dev/null || 
true
sudo iptables -t nat -I POSTROUTING -s 192.168.10.0/24 -d 10.0.0.0/24     -j MASQUERADE 2>/dev/null || 
true
info 
"Setting promiscuous mode on bridges..."
sudo ip 
link
 
set
 
"
$ATK_BRIDGE
"
 promisc on
sudo ip 
link
 
set
 
"
$TGT_BRIDGE
"
 promisc on
# Disable TX checksum offloading on the target bridge so Docker containers
# emit packets with valid TCP checksums. Without this, Windows VMs silently
# drop SYN-ACKs from Docker containers (checksum placeholder = 0x0000),
# causing Wazuh agent enrollment (port 1515) and data (port 1514) to hang.
info 
"Disabling TX checksum offloading on target bridge (fixes Windows ↔ container TCP)..."
sudo ethtool -K 
"
$TGT_BRIDGE
"
 tx off 2>/dev/null || 
true
# ── Remove stale vboxnet0 route (conflicts with Docker bridge route) ──────────
# vboxnet0 may persist after prior host-only deployments; its kernel route for
# 192.168.10.0/24 shadows the Docker bridge route, breaking host→container reach.
if
 ip route show dev vboxnet0 2>/dev/null | grep -q 
'192.168.10'
; 
then
    info 
"Removing stale vboxnet0 route for 192.168.10.0/24..."
    sudo ip route del 192.168.10.0/24 dev vboxnet0 2>/dev/null || 
true
fi
echo
 
""
info 
"Routing configured."
echo
 
"    Attacker (
$ATK_BRIDGE
 10.0.0.0/24) ↔ Target (
$TGT_BRIDGE
 192.168.10.0/24)"
echo
 
"    Windows VMs bridge directly onto 
$TGT_BRIDGE
 via Vagrantfile."

Makefile

.PHONY: up down 
reset
 test attack status logs shell deps
ANSIBLE_DIR    := ansible
PLAYBOOK_FLAGS := -v
# ─────────────────────────────────────────────────────────────────────────────
up: deps
 @echo 
"==> [1/5] Building rxphage implant (Linux ELF + Windows PE)..."
 docker compose build rxphage_builder
 @echo 
"==> [2/5] Starting Docker services..."
 docker compose up -d
 @echo 
"    Waiting for Wazuh to initialise..."
 @until docker 
exec
 dragonrx_wazuh pgrep wazuh-analysisd >
/dev/null
 
2
>&
1
; 
do
 
sleep
 
5
; done
 @docker cp siem/wazuh/rules/dragonrx_rules.xml dragonrx_wazuh:
/var/
ossec/etc/rules/ 
2
>
/dev/null
 || true
 @docker 
exec
 dragonrx_wazuh /var/ossec/bin/wazuh-control restart >
/dev/null
 
2
>&
1
 || true
 @echo 
"==> [3/5] Configuring host routing (Docker ↔ VirtualBox)..."
 bash scripts/setup_routing.sh
 @echo 
"==> [4/5] Starting Windows VMs..."
 vagrant up --provider virtualbox
 @echo 
"==> [5/5] Running Ansible provisioning..."
 cd $(ANSIBLE_DIR) && ansible-galaxy collection install -r requirements.yml
 cd $(ANSIBLE_DIR) && ansible-playbook playbooks/deploy.yml $(PLAYBOOK_FLAGS)
 @echo 
""
 @echo 
"==> Lab ready."
 @echo 
"    Kibana : http://localhost:5601"
 @echo 
"    Kali   : make shell"
 @echo 
"    Sliver : docker exec -it dragonrx_c2 sliver"
down:
 vagrant halt
 docker compose down
 @echo 
"==> Lab stopped. Data volumes preserved."
reset
:
 @echo 
"==> Full reset — destroying all state..."
 -vagrant destroy -f
 docker compose down -v
 @echo 
"==> Done. Run 'make up' to redeploy."
test:
 cd $(ANSIBLE_DIR) && ansible-playbook playbooks/test.yml $(PLAYBOOK_FLAGS)
attack:
 docker 
exec
 -it dragonrx_kali bash /opt/tools/run_attack.sh
# ─────────────────────────────────────────────────────────────────────────────
status:
 @echo 
"--- Docker ---"
 docker compose ps
 @echo 
""
 @echo 
"--- Vagrant ---"
 vagrant status
logs:
 docker compose logs -f --tail=
50
shell:
 docker 
exec
 -it dragonrx_kali /bin/bash
deps:
 @command -v docker     >
/dev/null
 
2
>&
1
 || (echo 
"ERROR: docker not found"
     && 
exit
 
1
)
 @docker compose version >
/dev/null
 
2
>&
1
 || (echo 
"ERROR: 'docker compose' (v2 plugin) not found — upgrade Docker Desktop or install the compose plugin"
 && 
exit
 
1
)
 @command -v vagrant    >
/dev/null
 
2
>&
1
 || (echo 
"ERROR: vagrant not found"
    && 
exit
 
1
)
 @command -v ansible    >
/dev/null
 
2
>&
1
 || (echo 
"ERROR: ansible not found — pip3 install ansible"
 && 
exit
 
1
)
 @command -v VBoxManage >
/dev/null
 
2
>&
1
 || (echo 
"ERROR: VBoxManage not found"
 && 
exit
 
1
)
 @python3 -c 
"import winrm"
 
2
>
/dev/null
 || (echo 
"ERROR: pywinrm not installed — pip3 install pywinrm"
 && 
exit
 
1
)
 @vagrant plugin list 
2
>
/dev/null
 | 
grep
 -
q
 vagrant-reload     || (echo 
"ERROR: vagrant plugin 'vagrant-reload' missing — vagrant plugin install vagrant-reload"
 && 
exit
 
1
)
 @vagrant plugin list 
2
>
/dev/null
 | 
grep
 -
q
 vagrant-hostmanager || (echo 
"ERROR: vagrant plugin 'vagrant-hostmanager' missing — vagrant plugin install vagrant-hostmanager"
 && 
exit
 
1
)
 @vagrant box list 
2
>
/dev/null
 | 
grep
 -
q
 
"StefanScherer/windows_2019"
 || \
  (echo 
"WARN: Vagrant box StefanScherer/windows_2019 not cached locally — 'vagrant up' will download it (~8 GB)"
)
 @vagrant box list 
2
>
/dev/null
 | 
grep
 -
q
 
"StefanScherer/windows_10"
 || \
  (echo 
"WARN: Vagrant box StefanScherer/windows_10 not cached locally — 'vagrant up' will download it (~8 GB)"
)
 @echo 
"[+] All prerequisites satisfied."

Deploy Sequence

make up
  │
  ├─ deps                           
check
 docker 
/
 vagrant 
/
 ansible 
/
 VBoxManage
  ├─ docker compose up 
-
d           
start
 Linux containers (Kali, Sliver, JNDI, Web01, SIEM)
  ├─ scripts
/
setup_routing.sh       bridge Docker target_net ↔ VirtualBox vboxnet0
  ├─ vagrant up                     boot DC01 
+
 FS01 
+
 WS01 (downloads boxes 
on
 
first
 run 
~
25
 GB)
  └─ ansible
-
playbook deploy.yml
        │
        ├─ Phase 
1
  verify Docker services healthy (Wazuh API 
+
 Kibana)
        ├─ Phase 
2
  DC01: 
set
 hostname → AD DS install → reboot → 
set
 admin password →
        │           domain promotion → reboot → users → SPNs → audit policy → SACL → Wazuh agent
        ├─ Phase 
3
  FS01: 
set
 hostname → 
set
 DNS → domain 
join
 → reboot →
        │           crown jewel data → SMB shares → Wazuh agent
        ├─ Phase 
4
  WS01: 
set
 hostname → 
set
 DNS → domain 
join
 → reboot →
        │           SMB firewall → jsmith 
local
 admin → C:\Temp → Wazuh agent
        ├─ Phase 
5
  SIEM: Kibana index patterns (wazuh
-
alerts
-
*
, zeek
-
*
)
        └─ Phase 
6
  test.yml: connectivity, Wazuh service, AD state, detection validation

Expected duration:

VM Specifications

Three Windows VMs managed by Vagrant and VirtualBox. All use WinRM for Ansible communication; no manual RDP setup required.

DC01 — Domain Controller (**192.168.10.10****)**Runs AD DS fornovatech.local. Ansible configures: domain promotion, DNS, user accounts (jsmith,svc_ldap,svc_backup), Kerberoastable SPN (MSSQLSvc/fs01.novatech.local:1433), Directory Service Access audit policy, SACL on the domain naming context (EID 4662 for DCSync detection), Wazuh agent enrollment.

FS01 — File Server (**192.168.10.20****)**Joined tonovatech.local. Hosts two SMB shares:

\\FS01\Research— synthetic Phase III clinical trial documents (CSVs, PDFs)
\\FS01\Manufacturing— synthetic formulation data (DOCX)

Crown jewel data is generated by Ansible via PowerShell. This is the primary collection and exfiltration target.

WS01 — Researcher Workstation (**192.168.10.50****)**Windows 10 joined to the domain. Userjsmithhas local admin rights. Used as a lateral movement pivot target (Pass-the-Hash / Pass-the-Ticket from DC01 credential dump).

Full Lab Environment Summary

Minimum host requirements:

Access points once deployed:

Follow for practical cybersecurity research

If you’re interested in**Offensive security,**AI security, real-world attack simulations, CTI, and detection engineering— this is exactly what I focus on.

Stay connected:

→Subscribe on Medium:medium.com/@1200km →Connect on LinkedIn:andrey-pautov →GitHub — tools & labs:github.com/anpa1200 →Contact:1200km@gmail.com

Ecosystem Fit​

Part of the Operation DragonRx series · Overview · Lab Architecture · Attack Playbook · DFIR Walkthrough​

Operation DragonRx series:​

Table of Content​

Deployment Stack: Docker + Vagrant + Ansible​

Deploy from Git​

One-Script Deployment​

Destroy the Lab​

Network Topology​

Directory Structure​

Prerequisites​

Vagrantfile​

docker-compose.yml​

Ansible​

ansible/requirements.yml​

ansible/ansible.cfg​

ansible/inventory/hosts.ini​

ansible/inventory/group_vars/windows.yml​

ansible/inventory/group_vars/all.yml​

Ansible Roles​

roles/dc01/tasks/main.yml​

roles/fs01/tasks/main.yml​

roles/ws01/tasks/main.yml​

roles/wazuh_agent/tasks/main.yml​

Master Deploy Playbook​

ansible/playbooks/deploy.yml​

Test Playbook​

ansible/playbooks/test.yml​

Zeek Config​

siem/zeek/entrypoint.sh​

siem/zeek/local.zeek​

Host Networking Setup​

scripts/setup_routing.sh​

Makefile​

Deploy Sequence​

VM Specifications​

Full Lab Environment Summary​

Follow for practical cybersecurity research​