T0835 Manipulate I/O Image — Attack Simulation

Complete technique description

Adversaries may manipulate the I/O image of PLCs through various means to prevent them from functioning as expected. Methods of I/O image manipulation may include overriding the I/O table via direct memory manipulation or using the override function used for testing PLC programs. [Dr. Kelvin T. Erickson December 2010] During the scan cycle, a PLC reads the status of all inputs and stores them in an image table. [Nanjundaiah, Vaidyanath] The image table is the PLCs internal storage location where values of inputs/outputs for one scan are stored while it executes the user program. After the PLC has solved the entire logic program, it updates the output image table. The contents of this output image table are written to the corresponding output points in I/O Modules.

One of the unique characteristics of PLCs is their ability to override the status of a physical discrete input or to override the logic driving a physical output coil and force the output to a desired status.

Official technique definition · Open in the interactive matrix

Detection telemetry and configuration

These contracts are selected through exact technique-to-data-component relationships or explicitly labelled planning overrides. Configure a collector at the relevant observation point; a telemetry name alone is not coverage.

{
  "schema": "1200km.telemetry.example.v1",
  "synthetic": true,
  "timestamp": "2026-09-27T12:00:00Z",
  "telemetry_id": "DC0078",
  "collector": "illustrative-lab-collector",
  "observation": {
    "source_ip": "192.0.2.10",
    "destination_ip": "198.51.100.20",
    "destination_port": 443,
    "protocol": "tcp",
    "bytes_sent": 128,
    "bytes_received": 512
  }
}

{
  "schema": "1200km.telemetry.example.v1",
  "synthetic": true,
  "timestamp": "2026-09-27T12:00:00Z",
  "telemetry_id": "DC0107",
  "collector": "illustrative-lab-collector",
  "observation": {
    "tag": "LAB.TankLevel",
    "value": 42,
    "unit": "percent",
    "quality": "good"
  }
}

Detection rules and analytic guidance

Open the dedicated detection workspace · Existing query engineering

Before treating a rule as coverage

1. Read the actual condition and logsource; identify attacker-side, victim-side or third-party visibility.
2. Map native sensor fields, parse times and identities, then compile for the selected backend.
3. Replay a behavior-positive case, a normal control, an authorized look-alike and a missing-telemetry case.
4. Record matches and misses with rule version and source events. No match is inconclusive when required telemetry is absent.

Anomaly-based detection

No exact technique-specific Atlas model is present for T0835 in the selected source snapshot. The following is a design worksheet, not a newly validated model.

Anomaly engineering worksheet

Start from the exact analytic above. The collection-specific lenses below are analyst recommendations; they do not assert that an arbitrary statistical deviation detects this technique.

• Network and protocol telemetry: Per source and observation point: connection rate, destination-host/port fan-out, response/failure ratio and previously unseen destinations. Compare equivalent time windows; separate authorized scanners, NAT and sampling effects.
• Industrial operations and physical process: Per asset, operating mode and engineering change window: deviations in command/state sequences, measurement residuals and communication freshness. Use a simulator or approved test rig; never generate hazardous physical effects.

1. Define an entity/peer group and feature; exclude the evaluation period from baseline training.
2. Use representative normal and maintenance activity. Do not invent a production threshold from a synthetic example.
3. Evaluate held-out behavior-positive and benign cases; measure false positives, misses and telemetry loss separately.
4. Keep abnormality separate from maliciousness. Correlate with the behavior-specific source evidence.

Anomaly Detection Atlas · Baseline, validation and blind spots

Attack tools and documented software

No reviewed lab-tool association is selected for this exact technique. This is a curation gap, not a statement that no tool can implement the behavior.

Software observed in source procedures

These are exact ATT&CK software-use relationships, including malware. They provide behavior context, not recommendations to download or execute malware. No safety or detector claim is inherited.

Simulation design and documented procedures

Atomic evidence: no compatible candidate in this snapshot. Live lab status: not run for these imported procedures.

Use a process simulator or isolated test rig with no connection to production controllers or physical actuators. Preserve safety interlocks; destructive effects require synthetic evidence, not real equipment damage.

No compatible Atomic procedure is present in this pinned evidence set. Technical feasibility has not been ruled out. A custom procedure must define the behavior, target, collection point, success observable and rollback before execution.

Technique-specific experiment contract

1. Choose one procedure implementing T0835 Manipulate I/O Image; identify the observable behavior in the source definition, not just its tactic.
2. Record exact target, tool/version, inputs, privileges, network limits and approval. Never run an imported default target automatically.
3. Enable the collection sources above and verify a benign baseline reaches the detector.
4. Run only the approved isolated scenario; capture native events and an independent behavior observable.
5. Evaluate the exact rule/model, restore the lab, and preserve configuration, event hashes, alerts, controls and misses.

Synthetic logs and offline contract check

Download synthetic collection fixture (JSON) · Download the complete engineering workbook

This fixture exercises the listed collection fields. It does not reproduce Manipulate I/O Image, label its example events as malicious, or measure detection effectiveness. Use the exact analytic and selected procedure to build an independently labelled behavior-positive dataset.

Not run in this browser. No network scan or attack command is executed by this control.

Validation status and remaining work

Source identity

Joined by exact technique/object IDs against hash-pinned sources.

Collection fixture

Available for offline schema exercises; not attack emulation.

Native telemetry / backend / real attack

Not validated for these imported procedures. Source fidelity and page tests cannot establish sensor or detector effectiveness.

All-page audit and evidence inventory · This page’s machine-readable workbook

Sources and evidence boundaries

Pinned MITRE STIX source · SHA-256 c9ca0ce523a1b5e512060a390415e8aefe8f6d32c5f82d7de81264960c1e1183. Definition and procedure context are reproduced from this snapshot, not independently re-investigated incidents.

• mitre-attack
• Dr. Kelvin T. Erickson December 2010
• Nanjundaiah, Vaidyanath