Complete technique description
Adversaries may chain together multiple proxies to disguise the source of malicious traffic. Typically, a defender will be able to identify the last proxy traffic traversed before it enters their network; the defender may or may not be able to identify any previous proxies before the last-hop proxy. This technique makes identifying the original source of the malicious traffic even more difficult by requiring the defender to trace malicious traffic through several proxies to identify its source.
For example, adversaries may construct or use onion routing networks – such as the publicly available Tor network – to transport encrypted C2 traffic through a compromised population, allowing communication with any device within the network.[Onion Routing] Adversaries may also use operational relay box (ORB) networks composed of virtual private servers (VPS), Internet of Things (IoT) devices, smart devices, and end-of-life routers to obfuscate their operations.[ORB Mandiant]
In the case of network infrastructure, it is possible for an adversary to leverage multiple compromised devices to create a multi-hop proxy chain (i.e., Network Devices). By leveraging Patch System Image on routers, adversaries can add custom code to the affected network devices that will implement onion routing between those nodes. This method is dependent upon the Network Boundary Bridging method allowing the adversaries to cross the protected network boundary of the Internet perimeter and into the organization’s Wide-Area Network (WAN). Protocols such as ICMP may be used as a transport.
Similarly, adversaries may abuse peer-to-peer (P2P) and blockchain-oriented infrastructure to implement routing between a decentralized network of peers.[NGLite Trojan]
Official technique definition · Open in the interactive matrix
Parent and sub-techniques
Related pages are navigation context. Their tools, rules and lab results are not automatically inherited.
Detection telemetry and configuration
These contracts are selected through exact technique-to-data-component relationships or explicitly labelled planning overrides. Configure a collector at the relevant observation point; a telemetry name alone is not coverage.
Firmware Modification · source-mapped
DC0004 collection page — Collect approved OEM firmware inventory/update audit and compare version or measured hashes against a known baseline. Use read-only vendor-supported interfaces.
Providers and collection configuration
- osquery: Scheduled host-state queries; supported tables and privileges vary by OS. Select a table that actually exposes the required object.
- Linux Audit plus inventory snapshots: Events explain changes; snapshots describe state at collection time.
- Define the inventory query, allowed host set, interval and least-privileged reader. Store a stable asset ID, observation time and collector version.
- Keep successive snapshots and calculate additions, removals and changed attributes. Pair state changes with audit events when available.
- Export collector health and missed-poll counts so a missing snapshot is not misclassified as a missing asset.
Required normalized fields: asset_id, firmware_before, firmware_after, change_ticket.
Illustrative collection event
Project-normalized synthetic JSON, not a native provider log, captured event, attack verdict or validated detection. A parser/adapter is required for a real SIEM. Example names, IPs and values are fictional.
{
"schema": "1200km.telemetry.example.v1",
"synthetic": true,
"timestamp": "2026-09-27T12:00:00Z",
"telemetry_id": "DC0004",
"collector": "illustrative-lab-collector",
"observation": {
"asset_id": "lab-device-1",
"firmware_before": "1.0-lab",
"firmware_after": "1.1-lab",
"change_ticket": "LAB-42"
}
}
Visibility limits: Snapshots miss short-lived objects and do not identify who caused a change. A generic inventory agent is not guaranteed to expose firmware or kernel-level details.
Network Connection Creation · source-mapped
DC0082 collection page — Enable scoped Sysmon NetworkConnect (3), disabled by default, or a platform-equivalent process-aware network sensor.
Providers and collection configuration
- Microsoft Sysmon: Windows event-based collection; enable the event types needed below.
- Linux Audit: Linux alternative for supported system-call and file events; different semantics and fields.
- Apple Endpoint Security clients: macOS alternative where the subscribed event exists; requires an entitled, approved client, not an iOS collector.
- On a disposable Windows host, review the installed Sysmon schema and current configuration; merge scoped event filters into the existing policy rather than replacing it.
- Forward Microsoft-Windows-Sysmon/Operational to the lab collector. Preserve event ID, timestamp, computer, process identifiers and the original event.
- For Linux or macOS, select the equivalent sensor separately and test its emitted fields; a Windows event ID does not transfer across platforms.
Required normalized fields: process_guid, destination_ip, destination_port, protocol, initiated.
Illustrative collection event
Project-normalized synthetic JSON, not a native provider log, captured event, attack verdict or validated detection. A parser/adapter is required for a real SIEM. Example names, IPs and values are fictional.
{
"schema": "1200km.telemetry.example.v1",
"synthetic": true,
"timestamp": "2026-09-27T12:00:00Z",
"telemetry_id": "DC0082",
"collector": "illustrative-lab-collector",
"observation": {
"process_guid": "lab-process-001",
"destination_ip": "198.51.100.20",
"destination_port": 443,
"protocol": "tcp",
"initiated": true
}
}
Visibility limits: Event filtering and sensor versions change coverage. High-volume image-load and process-access collection needs tuning; endpoint events alone do not establish intent.
Network Traffic Content · source-mapped
DC0085 collection page — Scope approved packet capture/protocol content collection to the lab flow; retain capture provenance and truncation indicators.
Providers and collection configuration
- Zeek: Connection and protocol metadata from traffic visible to the sensor.
- Suricata EVE: Configured flow, alert, DNS, HTTP, TLS and protocol records.
- Use an authorized lab TAP/SPAN, virtual mirror or gateway interface. Define which traffic crosses it; avoid assuming visibility into every segment.
- Enable the required Zeek analyzers or Suricata EVE event types. Export logs with sensor identity, clock synchronization and flow correlation identifiers.
- Monitor capture loss, truncation and exporter sampling. Capture payload only with approval and restrictive retention; encryption normally prevents plaintext inspection.
Required normalized fields: flow_id, protocol, method, path, payload_excerpt.
Illustrative collection event
Project-normalized synthetic JSON, not a native provider log, captured event, attack verdict or validated detection. A parser/adapter is required for a real SIEM. Example names, IPs and values are fictional.
{
"schema": "1200km.telemetry.example.v1",
"synthetic": true,
"timestamp": "2026-09-27T12:00:00Z",
"telemetry_id": "DC0085",
"collector": "illustrative-lab-collector",
"observation": {
"flow_id": "lab-flow-1",
"protocol": "http",
"method": "GET",
"path": "/lab-check",
"payload_excerpt": "LAB_TELEMETRY_CHECK"
}
}
Visibility limits: Flows are not packet payloads. NAT, asymmetric routes, encryption, missing mirrors and sampling can hide attribution or content. A destination connection alone does not prove malicious intent.
Network Traffic Flow · source-mapped
DC0078 collection page — Collect Zeek conn.log, Suricata flow events or exporter equivalents, including observation point and sampling settings.
Providers and collection configuration
- Zeek: Connection and protocol metadata from traffic visible to the sensor.
- Suricata EVE: Configured flow, alert, DNS, HTTP, TLS and protocol records.
- AWS VPC Flow Logs: IP traffic metadata alternative; no packet payload or DNS answer history, and some traffic is not logged.
- Use an authorized lab TAP/SPAN, virtual mirror or gateway interface. Define which traffic crosses it; avoid assuming visibility into every segment.
- Enable the required Zeek analyzers or Suricata EVE event types. Export logs with sensor identity, clock synchronization and flow correlation identifiers.
- Monitor capture loss, truncation and exporter sampling. Capture payload only with approval and restrictive retention; encryption normally prevents plaintext inspection.
Required normalized fields: source_ip, destination_ip, destination_port, protocol, bytes_sent, bytes_received.
Illustrative collection event
Project-normalized synthetic JSON, not a native provider log, captured event, attack verdict or validated detection. A parser/adapter is required for a real SIEM. Example names, IPs and values are fictional.
{
"schema": "1200km.telemetry.example.v1",
"synthetic": true,
"timestamp": "2026-09-27T12:00:00Z",
"telemetry_id": "DC0078",
"collector": "illustrative-lab-collector",
"observation": {
"source_ip": "192.0.2.10",
"destination_ip": "198.51.100.20",
"destination_port": 443,
"protocol": "tcp",
"bytes_sent": 128,
"bytes_received": 512
}
}
Visibility limits: Flows are not packet payloads. NAT, asymmetric routes, encryption, missing mirrors and sampling can hide attribution or content. A destination connection alone does not prove malicious intent.
Process Creation · source-mapped
DC0032 collection page — Collect Sysmon ProcessCreate (1); preserve ProcessGuid and parent identifiers. Security 4688 is an alternative with separate audit/command-line settings.
Providers and collection configuration
- Microsoft Sysmon: Windows event-based collection; enable the event types needed below.
- Linux Audit: Linux alternative for supported system-call and file events; different semantics and fields.
- Apple Endpoint Security clients: macOS alternative where the subscribed event exists; requires an entitled, approved client, not an iOS collector.
- On a disposable Windows host, review the installed Sysmon schema and current configuration; merge scoped event filters into the existing policy rather than replacing it.
- Forward Microsoft-Windows-Sysmon/Operational to the lab collector. Preserve event ID, timestamp, computer, process identifiers and the original event.
- For Linux or macOS, select the equivalent sensor separately and test its emitted fields; a Windows event ID does not transfer across platforms.
Required normalized fields: process_guid, image, parent_image, command_line, user.
<EventFiltering>
<ProcessCreate onmatch="include">
<Image condition="is">C:\Windows\System32\whoami.exe</Image>
</ProcessCreate>
</EventFiltering>
This fragment only selects the named process. It is not a complete production policy. Inspect the installed schema with sysmon64 -s; preserve existing rules, then apply the reviewed complete configuration with sysmon64 -c <configuration-file>.
Illustrative collection event
Project-normalized synthetic JSON, not a native provider log, captured event, attack verdict or validated detection. A parser/adapter is required for a real SIEM. Example names, IPs and values are fictional.
{
"schema": "1200km.telemetry.example.v1",
"synthetic": true,
"timestamp": "2026-09-27T12:00:00Z",
"telemetry_id": "DC0032",
"collector": "illustrative-lab-collector",
"observation": {
"process_guid": "lab-process-001",
"image": "C:\\Windows\\System32\\whoami.exe",
"parent_image": "C:\\Windows\\System32\\cmd.exe",
"command_line": "whoami",
"user": "LAB\\analyst"
}
}
Visibility limits: Event filtering and sensor versions change coverage. High-volume image-load and process-access collection needs tuning; endpoint events alone do not establish intent.
Simulation design and documented procedures
Atomic evidence: 4 compatible documented candidates. Live lab status: not run for these imported procedures.
Use disposable lab hosts and test accounts, explicit target allowlists, a clean snapshot, bounded egress and a restore plan. Review every candidate and dependency before any execution.
Tor Proxy Usage - MacOS
This test is designed to launch the tor proxy service, which is what is utilized in the background by the Tor Browser and other applications with add-ons in order to provide onion routing functionality.
Upon successful execution, the tor proxy service will be launched.
Pinned Atomic procedure · 12631354-fdbc-4164-92be-402527e748da · macos · sh.
Elevation: not declared required. Cleanup: defined upstream; review required. This is source documentation, not an execution approval.
No input arguments declared.
Review the upstream command, dependencies and cleanup at the source link. Source defaults may refer to real infrastructure or destructive actions; they are not authorized targets. No automatic install, prerequisite download or command execution is provided.
1 prerequisite definitions:
- Tor must be installed on the machine
Psiphon
Psiphon 3 is a circumvention tool from Psiphon Inc. that utilizes VPN, SSH and HTTP Proxy technology to provide you
with uncensored access to Internet.
This process will launch Psiphon 3 and establish a connection. Shortly after it will be shut down via process kill commands.
More information can be found about Psiphon using the following urls
http://s3.amazonaws.com/0ubz-2q11-gi9y/en.html
https://psiphon.ca/faq.html
Pinned Atomic procedure · 14d55ca0-920e-4b44-8425-37eedd72b173 · windows · powershell.
Elevation: not declared required. Cleanup: defined upstream; review required. This is source documentation, not an execution approval.
No input arguments declared.
Review the upstream command, dependencies and cleanup at the source link. Source defaults may refer to real infrastructure or destructive actions; they are not authorized targets. No automatic install, prerequisite download or command execution is provided.
3 prerequisite definitions:
- The proxy settings backup file must exist on disk at $env:Temp\proxy-backup.txt
- The Psiphon executable must exist in the Downloads folder
- Batch file containing commands to run must be in src directory
Tor Proxy Usage - Debian/Ubuntu/FreeBSD
This test is designed to launch the tor proxy service, which is what is utilized in the background by the Tor Browser and other applications with add-ons in order to provide onion routing functionality.
Upon successful execution, the tor proxy service will be launched.
Pinned Atomic procedure · 5ff9d047-6e9c-4357-b39b-5cf89d9b59c7 · linux · sh.
Elevation: required. Cleanup: defined upstream; review required. This is source documentation, not an execution approval.
No input arguments declared.
Review the upstream command, dependencies and cleanup at the source link. Source defaults may refer to real infrastructure or destructive actions; they are not authorized targets. No automatic install, prerequisite download or command execution is provided.
1 prerequisite definitions:
- Tor must be installed on the machine
Tor Proxy Usage - Windows
This test is designed to launch the tor proxy service, which is what is utilized in the background by the Tor Browser and other applications with add-ons in order to provide onion routing functionality.
Upon successful execution, the tor proxy will be launched, run for 60 seconds, and then exit.
Pinned Atomic procedure · 7b9d85e5-c4ce-4434-8060-d3de83595e69 · windows · powershell.
Elevation: not declared required. Cleanup: not declared. This is source documentation, not an execution approval.
TorExe: Location of tor.exe file. (type string; source default PathToAtomicsFolder\..\ExternalPayloads\tor\Tor\tor.exe)
Review the upstream command, dependencies and cleanup at the source link. Source defaults may refer to real infrastructure or destructive actions; they are not authorized targets. No automatic install, prerequisite download or command execution is provided.
1 prerequisite definitions:
- tor.exe must be installed on the machine
Technique-specific experiment contract
- Choose one procedure implementing T1090.003 Multi-hop Proxy; identify the observable behavior in the source definition, not just its tactic.
- Record exact target, tool/version, inputs, privileges, network limits and approval. Never run an imported default target automatically.
- Enable the collection sources above and verify a benign baseline reaches the detector.
- Run only the approved isolated scenario; capture native events and an independent behavior observable.
- Evaluate the exact rule/model, restore the lab, and preserve configuration, event hashes, alerts, controls and misses.